March 15, 2023 - Wednesday

 March 15, 2023 - Wednesday - Making the Cut...

Finished port side cleaning.

Cut board for access to water tank

Helped Richard launch and dock his boat.

Met two marina dogs.


As I mentioned yesterday, problems with my laptop are keeping me from posting pictures (for now). I will continue the blog without and attempt to post daily.


Fixing my water tank leak was my first priority today. There is something unnerving about taking a saw to a perfectly nice teak panel, but such was my first task for this repair. The starboard (right) water tank developed a leak while I was away, and the only way I could gain access to the area was by cutting my way in! Not my first choice, but it will work. With a little trim, it should look fine.


I taped the line I wanted to cut, fired up my borrowed saw and made some noise. The cut came out pretty good for free-hand. With the panel section removed, I had clear access to the leak. As suspected, the flange seal had failed. I have a new flange on board, so will drain the tank and start repairs tomorrow.


My cleaning efforts continue as well. I am doing the boat in sections, alternating cleaning with other tasks to avoid too much of one activity. My back prefers this...


Richard splashed (put his boat back in the water) today, so I helped him into his slip at the marina. He had his bottom (of the boat) painted. He will be heading west sometime soon.


I met a couple of the marina dogs. I bought treats, so we are becoming fast friends.

Comments

Post a Comment

Comments are now open to everyone.

Popular posts from this blog

Pierless Blog - 2025 - Vancouver Island Circumnavigation

Image
 Pierless Adventures - Vancouver Island 2025 I bought Pierless in Mazatlan, MX.  In 2023, I sailed north from Mazatlan, leaving the boat in Ventura California.  Last year I finished the trip north, bringing Pierless home to Washington after 3,000 miles of solo sailing. This year I will enjoy taking trips that I want to do versus trips I have to do - starting with a circumnavigation of Vancouver Island during the month of June.  This is a good month for the trip as fog won't be as prevalent, days will be longer and the coastal winds have made their shift to the NW, allowing for better sailing home on the outer coast.  The plan is to circle the island counter-clockwise to make the best use of these winds.. I will have company on this trip in the person of Dave.  He will meet me in Anacortes where I keep the boat.  We plan to move north on the east coast of the island quickly.  Once in the vicinity of the Broughton Marine Provincial Park, we will slo...
Read more

Pierless Blog - 2025-06-11 - Launch

Image
 Day 1, June 11: It has been a frustration 10 days...  One of the pre-launch projects was to install a new propeller shaft.  There were several problems with how the new shaft was manufactured and after three attempts we decided to just go with the old shaft and deal with the new one after the trip.  This change in perspective was thanks to Tracy when we told her we were likely to cancel the trip entirely.  Her wise comment was "why not just put the old one back in?  It got you here from Mexico."  Sometimes you can get too close to a problem and need a little independent perspective...  Pre Launch Due to tides, our launch was scheduled for 4 p.m.  No problems with the launch (leaks, engine, etc.), so we headed out of Anacortes determined to make as many miles as possible before dark.  We selected a few possibilities to choose from, depending on our speed along the way.  Our hope was to make it to Canoe Island near the east side of S...
Read more

Pierless Adventures - April 20 - Cabo San Lucas

Image
 We got an early start today.  I had to check in with the harbor master and with immigration.  There were boat projects to do, and a new town to explore. The marina is quite nice.  Clear restrooms and showers.  Things mostly work.  The waterfront is very busy with tourists.  Lots of gift shops and restaurants competing for our traveling dollars. I had some hardware to look for, so made a list of possible locations and put them on the map the marina folks gave us.  I would check shops to and from the harbor master office and immigration.  It warmed up early, so I had a warm walk to the harbor master.  After getting our entry and departure papers, I checked on the first hardware shop.  Mostly car parts... Immigration was next after about a mile walk back toward the harbor.  It was much like a DMV back home.  A long counter with staff and three rows of chairs that people were sitting in.  It wasn't clear how things worke...
Read more