May 1-2, 2023 - Monday and Tuesday

Monday, May 1st is Labor Day here in Mexico.  A national holiday, so the weekend was a little busier than usual.  Monday too.  People partying, music, fireworks, etc.  

I found another small problem with my windvane, so spent some time sorting out the problem.  At first I thought I would have to order a replacement bracket, but after talking with the manufacturer, we figured out a way to make a good repair.  I would need to take the parts to a shop to have some holes drilled for a bolt.  I dropped the part off on Tuesday and should have it back by Wednesday.  In the meantime, I took the device off the transom to make it easier to work on.

Transom and windvane

One of the issues with the windvane was corroded bolts.  I had two shear off already, which is why I have been replacing them all.  One that sheared off left part of the bolt head which I filed off and was able to disassemble.  Once I had the device off the transom, it was easier to get the broken stud out and work on the rest of the unit.

My second radar reflector still needed to be moved to its new location, so once again I went up the mast.  A couple neighbors came over to see how I climb up by myself.  I like the new location for the reflectors.  They can't move around much and won't be able to slip down at all.

Feeling good about the day's progress, I went out for pizza with my neighbor Peter.  We had a good visit and enough leftovers for three more meals!

Tuesday morning I made breakfast burritos.  Always a hit!  I added two fresh eggs to the mix and both of them were double yokes!


I worked some more on the immigration paperwork I need to complete to properly exit the country.  I spoke with a local boat broker to get his take and I did some more research.  I think I have all my ducks in a row.  We'll see.

Comments

Post a Comment

Comments are now open to everyone.

Popular posts from this blog

Pierless Blog - 2025 - Vancouver Island Circumnavigation

Image
 Pierless Adventures - Vancouver Island 2025 I bought Pierless in Mazatlan, MX.  In 2023, I sailed north from Mazatlan, leaving the boat in Ventura California.  Last year I finished the trip north, bringing Pierless home to Washington after 3,000 miles of solo sailing. This year I will enjoy taking trips that I want to do versus trips I have to do - starting with a circumnavigation of Vancouver Island during the month of June.  This is a good month for the trip as fog won't be as prevalent, days will be longer and the coastal winds have made their shift to the NW, allowing for better sailing home on the outer coast.  The plan is to circle the island counter-clockwise to make the best use of these winds.. I will have company on this trip in the person of Dave.  He will meet me in Anacortes where I keep the boat.  We plan to move north on the east coast of the island quickly.  Once in the vicinity of the Broughton Marine Provincial Park, we will slo...
Read more

Pierless Blog - 2025-06-11 - Launch

Image
 Day 1, June 11: It has been a frustration 10 days...  One of the pre-launch projects was to install a new propeller shaft.  There were several problems with how the new shaft was manufactured and after three attempts we decided to just go with the old shaft and deal with the new one after the trip.  This change in perspective was thanks to Tracy when we told her we were likely to cancel the trip entirely.  Her wise comment was "why not just put the old one back in?  It got you here from Mexico."  Sometimes you can get too close to a problem and need a little independent perspective...  Pre Launch Due to tides, our launch was scheduled for 4 p.m.  No problems with the launch (leaks, engine, etc.), so we headed out of Anacortes determined to make as many miles as possible before dark.  We selected a few possibilities to choose from, depending on our speed along the way.  Our hope was to make it to Canoe Island near the east side of S...
Read more

Pierless Adventures - April 20 - Cabo San Lucas

Image
 We got an early start today.  I had to check in with the harbor master and with immigration.  There were boat projects to do, and a new town to explore. The marina is quite nice.  Clear restrooms and showers.  Things mostly work.  The waterfront is very busy with tourists.  Lots of gift shops and restaurants competing for our traveling dollars. I had some hardware to look for, so made a list of possible locations and put them on the map the marina folks gave us.  I would check shops to and from the harbor master office and immigration.  It warmed up early, so I had a warm walk to the harbor master.  After getting our entry and departure papers, I checked on the first hardware shop.  Mostly car parts... Immigration was next after about a mile walk back toward the harbor.  It was much like a DMV back home.  A long counter with staff and three rows of chairs that people were sitting in.  It wasn't clear how things worke...
Read more